DESCRIPTION

The OMB 350 bar H2 valve is a multifunctional valve to be assembled on a tank system, for stationary or automotive use.

FEATURES

The valve is equipped with the following components:

• Inlet / outlet single or separated
• Solenoid valve electronically controlled
• Manual safety tap, to be used in order to isolate the automatic valve (in case of failure or maintenance)
• Bleed Valve, directly connected to the tank (in order to by-pass the excess flow, the manual valve and the solenoid valve)
• Thermal PRD (pressure relief device to prevent the explosion of the tank due to fire, based on a glass bulb concept)
• Filter 50 micron
• Excess flow valve (flow limiter)
• Temperature sensor
• Live port for pressure sensor or line middle TPRD (threaded connection directly connected to the tank)
• Pressure port (after pressure regulator)

CERTIFICATIONS

• EC79
• R134
• HGV3.1
• PED

DESCRIPTION

• 10 Microns filter protection
• In-line check valve

CERTIFICATIONS

• EC79

DESCRIPTION

OMB 700 bar H2 valve is a multifunctional valve to be assembled on a tank system, for stationary or automotive use. The valve is equipped with the following components:

• Single inlet/outlet port
• Improved solenoid valve endurance compare to Gen1
• Manual safety tap, to be used in order to isolate the automatic valve (in case of failure or maintenance);
• Bleed Valve, directly connected to the tank (in order to by-pass the excess flow, the manual valve and the solenoid valve)
• Thermal PRD (pressure relief device to prevent the explosion of the tank due to fire, based on a glass bulb concept)
• Two Filters 10 micron
• Fueling Check valve
• Temperature sensor
• Excess flow valve (flow limiter)
• Pressure Port
• Port for Middle TPRD

CERTIFICATIONS

• EC79
• R134
• EU535
• HGV3.1
• HPRD1

DESCRIPTION

The OMB 700/350 bar H2 Pressure Regulator (HPR) is a mechanical double stage regulator designed for fuel cell applications with the following components integrated:

• Inlet / outlet port
• Inlet Filter 10 microns
• Pressure relief valve (PRV)
• Excess Flow Valve (EFV)

FEATURES

The HPR can be requested with the following options:

• High Pressure sensors
• Low Pressure sensors (up to 2)
• Low Pressure Service Valve
• Outlet regulated pressure from 8bar to 16bar
• Inlet 700bar: Voss / Autoclave OD 3/8
• Inlet 350bar: SAEJ 1926
• PRV: customizable activation
• Possibility to install high and low-pressure sensor

CERTIFICATIONS

• EC79
• PED

DESCRIPTION

mechanical valve that opens and closes under the action of the upstream pressure.

DESCRIPTION

3-way solenoid valve electrically actuated.

DESCRIPTION

Filter designed to protect the downstream items from contamination.

DESCRIPTION

mechanical single stage pressure regulator with inlet filter.

DESCRIPTION

bi-stable solenoid valve that opens and closes upon electrical command and keep the open/close also without the electrical signal.

DESCRIPTION

The pressure relief valve is a safety component which activates in case of overpressure, venting the gas from its outlet.

DESCRIPTION

multifunctional block that includes several functions as PRV, SOV, check valve and sensors.

DESCRIPTION

solenoid valve that provide downstream flow proportional to the electrical input.

DESCRIPTION

solenoid valve normally closed.

DESCRIPTION

OMB has developed a water separator with anode anddrain valves and level sensor integrated.
The integration allows to the final user to have a plug and play system reducing the assembly time.
The water separator is characterized by a water separation efficiency higher than 95%.